QNN Execution Provider

The QNN Execution Provider for ONNX Runtime enables hardware accelerated execution on Qualcomm chipsets. It uses the Qualcomm AI Engine Direct SDK (QNN SDK) to construct a QNN graph from an ONNX model which can be executed by a supported accelerator backend library. OnnxRuntime QNN Execution Provider can be used on Android and Windows devices with Qualcomm Snapdragon SOC’s.

Contents

Install Pre-requisites (Build from Source Only)

If you build QNN Execution Provider from source, you should first download the Qualcomm AI Engine Direct SDK (QNN SDK) from https://qpm.qualcomm.com/main/tools/details/qualcomm_ai_engine_direct

QNN Version Requirements

ONNX Runtime QNN Execution Provider has been built and tested with QNN 2.22.x and Qualcomm SC8280, SM8350, Snapdragon X SOC’s on Android and Windows

Build (Android and Windows)

For build instructions, please see the BUILD page.

Pre-built Packages (Windows Only)

Note: Starting version 1.18.0 , you do not need to separately download and install QNN SDK. The required QNN dependency libraries are included in the OnnxRuntime packages.

  • NuGet package
    • Feed for nightly packages of Microsoft.ML.OnnxRuntime.QNN can be found here
  • Python package
    • Requirements:
      • Windows ARM64 (for inferencing on local device with Qualcomm NPU)
      • Windows X64 (for quantizing models. see Generating a quantized model)
      • Python 3.11.x
      • Numpy 1.25.2 or >= 1.26.4
    • Install: pip install onnxruntime-qnn
    • Install nightly package python -m pip install -i https://aiinfra.pkgs.visualstudio.com/PublicPackages/_packaging/ORT-Nightly/pypi/simple/ort-nightly-qnn

Qualcomm AI Hub

Qualcomm AI Hub can be used to optimize and run models on Qualcomm hosted devices. OnnxRuntime QNN Execution Provider is a supported runtime in Qualcomm AI Hub

Configuration Options

The QNN Execution Provider supports a number of configuration options. These provider options are specified as key-value string pairs.

"backend_path" Description
‘libQnnCpu.so’ or ‘QnnCpu.dll’ Enable CPU backend. Useful for integration testing. CPU backend is a reference implementation of QNN operators
‘libQnnHtp.so’ or ‘QnnHtp.dll’ Enable HTP backend. Offloads compute to NPU.
"profiling_level" Description
‘off’  
‘basic’  
‘detailed’  
"profiling_file_path" Description
‘your_qnn_profile_path.csv’ Specify the csv file path to dump the QNN profiling events

See profiling-tools for more info on profiling
Alternatively to setting profiling_level at compile time, profiling can be enabled dynamically with ETW (Windows). See tracing for more details

"rpc_control_latency" Description
microseconds (string) allows client to set up RPC control latency in microseconds
"vtcm_mb" Description
size in MB (string) QNN VTCM size in MB, defaults to 0 (not set)
"htp_performance_mode" Description
‘burst’  
‘balanced’  
‘default’  
‘high_performance’  
‘high_power_saver’  
‘low_balanced’  
‘low_power_saver’  
‘power_saver’  
‘sustained_high_performance’  
"qnn_saver_path" Description
filpath to ‘QnnSaver.dll’ or ‘libQnnSaver.so’ File path to the QNN Saver backend library. Dumps QNN API calls to disk for replay/debugging.
"qnn_context_priority" Description
‘low’  
‘normal’ default.
‘normal_high’  
‘high’  
"htp_graph_finalization_optimization_mode" Description
‘0’ default.
‘1’ faster preparation time, less optimal graph.
‘2’ longer preparation time, more optimal graph.
‘3’ longest preparation time, most likely even more optimal graph.
"soc_model" Description
Model number (string) The SoC model number. Refer to the QNN SDK documentation for valid values. Defaults to “0” (unknown).
"htp_arch" Description
Hardware Architecture HTP Architecture number. Refer to the QNN SDK documentation for valid values. Default (none)
"device_id" Description
Device ID (string) The ID of the device to use when setting htp_arch. Defaults to “0” (for single device).
"enable_htp_fp16_precision" Description Example
‘0’ default.
‘1’ Enable the float32 model to be inferenced with fp16 precision.

Supported ONNX operators

Operator Notes
ai.onnx:Abs  
ai.onnx:Add  
ai.onnx:And  
ai.onnx:ArgMax  
ai.onnx:ArgMin  
ai.onnx:Asin  
ai.onnx:Atan  
ai.onnx:AveragePool  
ai.onnx:BatchNormalization fp16 supported since 1.18.0
ai.onnx:Cast  
ai.onnx:Clip fp16 supported since 1.18.0
ai.onnx:Concat  
ai.onnx:Conv 3d supported since 1.18.0
ai.onnx:ConvTranspose 3d supported since 1.18.0
ai.onnx:Cos  
ai.onnx:DepthToSpace  
ai.onnx:DequantizeLinear  
ai.onnx:Div  
ai.onnx:Elu  
ai.onnx:Equal  
ai.onnx:Exp  
ai.onnx:Expand  
ai.onnx:Flatten  
ai.onnx:Floor  
ai.onnx:Gather Only supports positive indices
ai.onnx:Gelu  
ai.onnx:Gemm  
ai.onnx:GlobalAveragePool  
ai.onnx:Greater  
ai.onnx:GreaterOrEqual  
ai.onnx:GridSample  
ai.onnx:HardSwish  
ai.onnx:InstanceNormalization  
ai.onnx:LRN  
ai.onnx:LayerNormalization  
ai.onnx:LeakyRelu  
ai.onnx:Less  
ai.onnx:LessOrEqual  
ai.onnx:Log  
ai.onnx:LogSoftmax  
ai.onnx:LpNormalization p == 2
ai.onnx:MatMul Supported input data types on HTP backend: (uint8, uint8), (uint8, uint16), (uint16, uint8)
ai.onnx:Max  
ai.onnx:MaxPool  
ai.onnx:Min  
ai.onnx:Mul  
ai.onnx:Neg  
ai.onnx:Not  
ai.onnx:Or  
ai.onnx:Prelu fp16, int32 supported since 1.18.0
ai.onnx:Pad  
ai.onnx:Pow  
ai.onnx:QuantizeLinear  
ai.onnx:ReduceMax  
ai.onnx:ReduceMean  
ai.onnx:ReduceMin  
ai.onnx:ReduceProd  
ai.onnx:ReduceSum  
ai.onnx:Relu  
ai.onnx:Resize  
ai.onnx:Round  
ai.onnx:Sigmoid  
ai.onnx:Sign  
ai.onnx:Sin  
ai.onnx:Slice  
ai.onnx:Softmax  
ai.onnx:SpaceToDepth  
ai.onnx:Split  
ai.onnx:Sqrt  
ai.onnx:Squeeze  
ai.onnx:Sub  
ai.onnx:Tanh  
ai.onnx:Tile  
ai.onnx:TopK  
ai.onnx:Transpose  
ai.onnx:Unsqueeze  
ai.onnx:Where  
com.microsoft:DequantizeLinear Provides 16-bit integer dequantization support
com.microsoft:Gelu  
com.microsoft:QuantizeLinear Provides 16-bit integer quantization support

Supported data types vary by operator and QNN backend. Refer to the QNN SDK documentation for more information.

Running a model with QNN EP’s HTP backend (Python)

Offline workflow for quantizing an ONNX model for use on QNN EP

The QNN HTP backend only supports quantized models. Models with 32-bit floating-point activations and weights must first be quantized to use a lower integer precision (e.g., 8-bit or 16-bit integers).

This section provides instructions for quantizing a model and then running the quantized model on QNN EP’s HTP backend using Python APIs. Please refer to the quantization page for a broader overview of quantization concepts.

Model requirements

QNN EP does not support models with dynamic shapes (e.g., a dynamic batch size). Dynamic shapes must be fixed to a specific value. Refer to the documentation for making dynamic input shapes fixed for more information.

Additionally, QNN EP supports a subset of ONNX operators (e.g., Loops and Ifs are not supported). Refer to the list of supported ONNX operators.

Generating a quantized model (x64 only)

The ONNX Runtime python package provides utilities for quantizing ONNX models via the onnxruntime.quantization import. The quantization utilities are currently only supported on x86_64 due to issues installing the onnx package on ARM64. Therefore, it is recommended to either use an x64 machine to quantize models or, alternatively, use a separate x64 python installation on Windows ARM64 machines.

Install the ONNX Runtime x64 python package. (please note, you must use x64 package for quantizing the model. use the arm64 package for inferencing and utilizing the HTP/NPU)

python -m pip install onnxruntime-qnn

Quantization for QNN EP requires the use of calibration input data. Using a calibration dataset that is representative of typical model inputs is crucial in generating an accurate quantized model.

The following snippet defines a sample DataReader class that generates random float32 input data. Note that using random input data will most likely produce an inaccurate quantized model. Refer to the implementation of a Resnet data reader for one example of how to create a CalibrationDataReader that provides input from image files on disk.

# data_reader.py

import numpy as np
import onnxruntime
from onnxruntime.quantization import CalibrationDataReader


class DataReader(CalibrationDataReader):
    def __init__(self, model_path: str):
        self.enum_data = None

        # Use inference session to get input shape.
        session = onnxruntime.InferenceSession(model_path, providers=['CPUExecutionProvider'])

        inputs = session.get_inputs()

        self.data_list = []

        # Generate 10 random float32 inputs
        # TODO: Load valid calibration input data for your model
        for _ in range(10):
            input_data = {inp.name : np.random.random(inp.shape).astype(np.float32) for inp in inputs}
            self.data_list.append(input_data)

        self.datasize = len(self.data_list)

    def get_next(self):
        if self.enum_data is None:
            self.enum_data = iter(
                self.data_list
            )
        return next(self.enum_data, None)

    def rewind(self):
        self.enum_data = None

The following snippet pre-processes the original model and then quantizes the pre-processed model to use uint16 activations and uint8 weights. Although the quantization utilities expose the uint8, int8, uint16, and int16 quantization data types, QNN operators typically support the uint8 and uint16 data types. Refer to the QNN SDK operator documentation for the data type requirements of each QNN operator.

# quantize_model.py

import data_reader
import numpy as np
import onnx
from onnxruntime.quantization import QuantType, quantize
from onnxruntime.quantization.execution_providers.qnn import get_qnn_qdq_config, qnn_preprocess_model

if __name__ == "__main__":
    input_model_path = "model.onnx"  # TODO: Replace with your actual model
    output_model_path = "model.qdq.onnx"  # Name of final quantized model
    my_data_reader = data_reader.DataReader(input_model_path)

    # Pre-process the original float32 model.
    preproc_model_path = "model.preproc.onnx"
    model_changed = qnn_preprocess_model(input_model_path, preproc_model_path)
    model_to_quantize = preproc_model_path if model_changed else input_model_path

    # Generate a suitable quantization configuration for this model.
    # Note that we're choosing to use uint16 activations and uint8 weights.
    qnn_config = get_qnn_qdq_config(model_to_quantize,
                                    my_data_reader,
                                    activation_type=QuantType.QUInt16,  # uint16 activations
                                    weight_type=QuantType.QUInt8)       # uint8 weights

    # Quantize the model.
    quantize(model_to_quantize, output_model_path, qnn_config)

Running python quantize_model.py will generate a quantized model called model.qdq.onnx that can be run on Windows ARM64 devices via ONNX Runtime’s QNN EP.

Refer to the following pages for more information on usage of the quantization utilities:

Running a quantized model on Windows ARM64 (onnxruntime-qnn version >= 1.18.0)

Install the ONNX Runtime ARM64 python package for QNN EP (requires Python 3.11.x and Numpy 1.25.2 or >= 1.26.4):

python -m pip install onnxruntime-qnn

The following Python snippet creates an ONNX Runtime session with QNN EP and runs the quantized model model.qdq.onnx on the HTP backend.

# run_qdq_model.py

import onnxruntime
import numpy as np

options = onnxruntime.SessionOptions()

# (Optional) Enable configuration that raises an exception if the model can't be
# run entirely on the QNN HTP backend.
options.add_session_config_entry("session.disable_cpu_ep_fallback", "1")

# Create an ONNX Runtime session.
# TODO: Provide the path to your ONNX model
session = onnxruntime.InferenceSession("model.qdq.onnx",
                                       sess_options=options,
                                       providers=["QNNExecutionProvider"],
                                       provider_options=[{"backend_path": "QnnHtp.dll"}]) # Provide path to Htp dll in QNN SDK

# Run the model with your input.
# TODO: Use numpy to load your actual input from a file or generate random input.
input0 = np.ones((1,3,224,224), dtype=np.float32)
result = session.run(None, {"input": input0})

# Print output.
print(result)

Running python run_qdq_model.py will execute the quantized model.qdq.onnx model on the QNN HTP backend.

Notice that the session has been optionally configured to raise an exception if the entire model cannot be executed on the QNN HTP backend. This is useful for verifying that the quantized model is fully supported by QNN EP. Available session configurations include:

The above snippet only specifies the backend_path provider option. Refer to the Configuration options section for a list of all available QNN EP provider options.

QNN context binary cache feature

There’s a QNN context which contains QNN graphs after converting, compiling, filnalizing the model. QNN can serialize the context into binary file, so that user can use it for futher inference direclty (without the QDQ model) to improve the model loading cost. The QNN Execution Provider supports a number of session options to configure this.

Dump QNN context binary

  1. Create session option, set “ep.context_enable” to “1” to enable QNN context dump. The key “ep.context_enable” is defined as kOrtSessionOptionEpContextEnable in onnxruntime_session_options_config_keys.h.
  2. Create the session with the QDQ model using session options created in step 1, and use HTP backend A Onnx model with QNN context binary will be created once the session is created/initialized. No need to run the session. The QNN context binary generation can be done on the QualComm device which has HTP using Arm64 build. It can also be done on x64 machine using x64 build (not able to run it since there’s no HTP device).

The generated Onnx model which has QNN context binary can be deployed to production/real device to run inference. This Onnx model is treated as a normal model by QNN Execution Provider. Inference code keeps same as inference with QDQ model on HTP backend.

Code example

#include "onnxruntime_session_options_config_keys.h"

// C++
Ort::SessionOptions so;
so.AddConfigEntry(kOrtSessionOptionEpContextEnable, "1");

// C
const OrtApi* g_ort = OrtGetApiBase()->GetApi(ORT_API_VERSION);
OrtSessionOptions* session_options;
CheckStatus(g_ort, g_ort->CreateSessionOptions(&session_options));
g_ort->AddSessionConfigEntry(session_options, kOrtSessionOptionEpContextEnable, "1");

# Python
import onnxruntime

options = onnxruntime.SessionOptions()
options.add_session_config_entry("ep.context_enable", "1")

Configure the context binary file path

The generated Onnx model with QNN context binary is default to [input_QDQ_model_path]_ctx.onnx in case user does not specify the path. User can to set the path in the session option with the key “ep.context_file_path”. Example code below:

// C++
so.AddConfigEntry(kOrtSessionOptionEpContextFilePath, "./model_a_ctx.onnx");

// C
g_ort->AddSessionConfigEntry(session_options, kOrtSessionOptionEpContextFilePath, "./model_a_ctx.onnx");

# Python
options.add_session_config_entry("ep.context_file_path", "./model_a_ctx.onnx")

Disable the embed mode

The QNN context binary content is embeded in the generated Onnx model by default. User can to disable it by setting “ep.context_embed_mode” to “0”. In that case, a bin file will be generated separately. The file name looks like [ctx.onnx]QNNExecutionProvider_QNN[hash_id]_x_x.bin. The name is provided by Ort and tracked in the generated Onnx model. It will cause problems if any changes to the bin file. This bin file needs to sit together with the generated Onnx file.

// C++
so.AddConfigEntry(kOrtSessionOptionEpContextEmbedMode, "0");

// C
g_ort->AddSessionConfigEntry(session_options, kOrtSessionOptionEpContextEmbedMode, "0");

# Python
options.add_session_config_entry("ep.context_embed_mode", "0")

QNN EP weight sharing

Weight sharing in Onnx domain

Weight sharing in Onnx means multiple Onnx models with external weights point to the same external weight file. The Onnx models share same tensor names so that they reference to the same tensor data.

Weight sharing across Onnx models

Weight sharing in QNN domain

QNN weight sharing is enabled with QNN pre-generated QNN context binary. It requires users to generate context binary offline on Linux x86_64 or Windows x86_64 machine (Windows support since QNN 2.26). The QNN context binary contains multiple graphs which share the same tensors.

Weight sharing in QNN context binary

Weight sharing in QNN domain

The way OnnxRuntime to convert Onnx model with weight sharing to QNN context binary with weight sharing.

  1. Create QNN context with weight sharing configuration enabled.
  2. Convert and compile model1.onnx into QNN context (get Qnn graph1).
  3. Convert and compile model2.onnx into QNN context (get Qnn graph2).
  4. Repeat step 2 if more models.
  5. Generated the QNN context binary file, generated wrapped Onnx model with EPContext nodes. OnnxRuntime QNN EP provides OnnxRuntime_qnn_ctx_gen tool to complete these steps. Example command line: 
    ./onnxruntime_qnn_ctx_gen -i "soc_model|60 htp_graph_finalization_optimization_mode|3" ./model1.onnx,./model2.onnx

    It creates 2 Onnx model (model1.onnx_ctx.onnx, model2.onnx_ctx.onnx) and a QNN context binary file (model2.onnx_ctx.onnx_xxx.bin).

Weight sharing from Onnx to QNN

If user creates the QNN context binary .bin file weight sharing from QNN toolchain (qnn-context-binary-generator). The context binary .bin file looks the same. User needs to create model1.onnx and model2.onnx with EPContext node which points to this .bin file. Each EPContext node should refer (node name and partition_name) to different Qnn graph names from the QNN context. Here’s an example script for reference gen_qnn_ctx_onnx_model.py which wraps one single QNN graph into EPContext node.

Inference with QNN resource sharing workflow

OnnxRuntime inference session need to have resource sharing enabled (set session option ep.share_ep_contexts to 1) to use the dumped Qnn context model with weight sharing enabled.

  1. Create OnnxRuuntime inference session with ep.share_ep_contexts=1, loads the model1.onnx_ctx.onnx model. 1.1 The session loads the model1.onnx_ctx.onnx model. 1.2 The shared place is empty. 1.3 EPContext node1 in model1.onnx_ctx.onnx specifies that it uses Qnn_graph1 1.4 QNN EP loads the qnn_ctx.bin and deserialize the binary to get Qnn graphs (Qnn_graph1, Qnn_graph2). 1.5 Uses Qnn_graph1 for this OnnxRuntime session. 1.6 Put the Qnn_graph2 into the shared place.
  2. Create OnnxRuuntime inference session with ep.share_ep_contexts=1, loads the model2.onnx_ctx.onnx model. 2.1 The session loads the model2.onnx_ctx.onnx model. 2.2 The EPContext node2 in model2.onnx_ctx.onnx specifies that it uses Qnn_graph2. 2.3 The shared place has Qnn_graph2. 2.4 QNN EP skips loading qnn_ctx.bin since it gets what it wants from the shared place. 2.5 Uses Qnn_graph2 from the shared place for this session.
  3. To avoid issues while existing execution, user needs to destroy the 2nd session first, then the 1st session.

Code example.

Usage

C++

C API details are here.

Ort::Env env = Ort::Env{ORT_LOGGING_LEVEL_ERROR, "Default"};
std::unordered_map<std::string, std::string> qnn_options;
qnn_options["backend_path"] = "QnnHtp.dll";
Ort::SessionOptions session_options;
session_options.AppendExecutionProvider("QNN", qnn_options);
Ort::Session session(env, model_path, session_options);

Python 

import onnxruntime as ort
# Create a session with QNN EP using HTP (NPU) backend.
sess = ort.InferenceSession(model_path, providers=['QNNExecutionProvider'], provider_options=[{'backend_path':'QnnHtp.dll'}])`

Inference example

Image classification with Mobilenetv2 in CPP using QNN Execution Provider with QNN CPU & HTP Backend

Error handling

HTP SubSystem Restart - SSR

QNN EP returns StatusCode::ENGINE_ERROR regarding QNN HTP SSR issue. Uppper level framework/application should recreate Onnxruntime session if this error detected during session run.